MDF black 3 mm (MS0214)

MDF black 3 mm
width (mm) height (mm) prijs (€)
300 150 €0.94
210 297 €1.19
300 300 €1.68
600 300 €3.33
600 600 €6.41
1200 300 €6.29
900 600 €9.32
1200 600 €12.34
Prices are including 21% vat and excluding cutting costs
Machine dimensions


Thickness3.0 mm
Thickness tolerance±0.20 mm
Kerf width0.15 mm
Density1050 kg/m3
Protective Foiloptional

This wood-fibre board is coloured all the way through. It is a cost-effective material that is strong and requires no finishing.

Coloured MDF is a homogeneous material with a relatively high hardness and stiffness. Compared with normal MDF it is quite a bit heavier and somewhat stronger. The surface is smooth and both sides are the same. It is not waterproof but does not discolour and remains relatively strong when wet.


Typical applications: The technical and aesthetic advantages of this material make it suitable for a variety of applications. Examples include technical prototyping, enclosures and other constructions as well as signage.

Finishing: This material can be sanded and finished in other ways just like normal MDF. Coating or varnishing is unnecessary for most applications, except for protecting against moisture or grease.

Appearance: Coloured MDF is suitable for laser-cutting due to its homogeneous density. The laser-cut edge is black and somewhat darker than the surface. The edge does leave deposits of soot after cutting. This can be removed with a dry cloth or by sanding.
Surface and line engraving are possible, resulting in either a lighter (white/grey) surface or a black surface depending on the settings used.