polyacetal translucent white 5 mm (MS0200)

polyacetal translucent white 5 mm
width (mm) height (mm) prijs (€)
300 150 €11.82
210 297 €14.75
500 500 €52.54
1000 500 €87.57
Prices are including 21% vat and excluding cutting costs
Machine dimensions


Also known asPOM
Thickness5.0 mm
Thickness tolerance±0.70 mm
Kerf width0.20 mm
Density1410 kg/m3
Protective Foiloptional

A technical plastic that is used in mechanical and construction applications.

Polyacetal is strong, tough and rigid. It has a low coefficient of friction and high abrasion resistance. The static and dynamic coefficients of friction are equal, such that there is little to no occurrence of 'stick slip' in interlocking joints. Polyacetal is also resilient and can be used to absorb impacts and vibrations. It is chemically resistant to many fuels, oils and fats.


Typical applications: Polyacetal is used for machine parts such as (low-load) gears, adapter plates and sliding joints.

Bonding: Polyacetal is virtually impossible to glue. Bolts and similar are usually used for attachments. It is possible however to attach parts with double-sided adhesive film.

Appearance: The surface is smooth but sometimes contains scratches. The plates may bend slightly. The laser cut is neat and shows no signs of melting or discolouration. Without appropriate measures a light scorching can be visible at the starting points of the laser and on the underside a small (0.5 mm) melted edge along the length of the cut. The use of protective film prevents both effects.
Raster engraving is not effective and results in poor contrast. Line engraving is possible, however the material does not change in colour, such that little contrast is achieved. For indicative applications such as marking part numbers, line engravings are useful.


polyacetale 5mm